MPO-LC Fiber Optic Patch Cord
Description :
Complied with the standard TIA-568C.3-2008 and YD/T1272.5-2009, it was widely used in the pre-terminated system of the IDC and blocks. This system applies to the 10G Ethernet transmissions and it is also available to the updated system for 40G/100G in the future.
Complied with the standard TIA-568C.3-2008 and YD/T1272.5-2009, it was widely used in the pre-terminated system of the IDC and blocks. This system applies to the 10G Ethernet transmissions and it is also available to the updated system for 40G/100G in the future.
Application :
- Ready equipped MPO connectors and technical tensile and resilient design for 400N and 100N/CM
- Special test for all the ports of the trunk cable makes higher reliability
- Low loss MPO connectors on both two sides
- Easily updated to the next generation for 40G and 100G
- 12 cores. Patch cords, OM3, OM4 and OS2 fiber optic cable, length in meters. Outside coatings can be OFNR, OFNP and LSZH, etc.
- Faster equip
- LC duplex connector directly to the network equipment
- High density in the wiring panels
- Easy cabling management in the most intensive SAN switch application
- Customized length
- Horizontal and regional cabling
- Different type as MPO-LC, MPO-SC, MPO-MPO, etc
- -20° C + 75° C
- Connected to MPO adapters and LC ports
- Different options for OM3, OM4 and 9/125 single mode
| Technical Parameter | |||
| Connector performance | Insertion loss (average) | Insertion loss (max) | Return loss |
| MPO low loss (Multimode) | 0.10 dB | 0.30 dB | N/A |
| MPO standard loss (Multimode) | 0.20 dB | 0.50 dB | N/A |
| LC or SC (Multimode) | 0.08 dB | 0.15 dB | N/A |
| MPO low loss (single mode) | 0.10 dB | 0.35 dB | > 60 dB |
| MPO standard loss (single mode) | 0.20 dB | 0.75 dB | > 60 dB |
| LC or SC (single mode) | 0.10 dB | 0.20 dB | > 0.55 dB |
| Transmission Performance | |||
| Part number | OM3 50/125µm (850/1300nm) | OM4 50/125µm (850/1300nm) | OS2 9/125µm (1350/1550um) |
| MAX Attenuation (dB/KM) | 2.5/0.7 | 205/0.7 | 0.36/0.22 |
| MIN EMB bandwidth (MHz.KM) | 2000/- | 4700/- | / |
| Attenuation variation, 7.5mm radius,250um coated fiber, 850nm | <0.2 dB | <0.2 dB | / |
| Attenuation variation, 7.5mm radius,250um coated fiber, 1550nm | / | / | <0.2 dB |
| Order Information | ||
| Part number | Description | Package |
| LNAM65-12-OM3-* | 12 cores multi mode MPO-LC Fiber patch cord | 1 PCS |
| LNAM65-12-OM4-* | 12 cores multi mode MPO-LC Fiber patch cord | 1 PCS |
| LNAS65-12-OS2-* | 12 cores Single mode MPO-LC Fiber patch cord | 1 PCS |
| LNAM65-24-OM3-* | 24 cores multi mode MPO-LC Fiber patch cord | 1 PCS |
| LNAM65-24-OM4-* | 24 cores multi mode MPO-LC Fiber patch cord | 1 PCS |
| LNAS65-24-OS2-* | 24 cores Single mode MPO-LC Fiber patch cord | 1 PCS |